Aluminum soffit, fascia, and eavestrough repair in Calgary: fix loose panels, dented trims, leaking gutter corners, and wind damage.
Fast repair and maintenance for loose soffits, dented fascia, leaking eavestrough joints, and wind-blown trim capping across Calgary. Raico Roofing restores loose or damaged aluminum soft metals to keep your building watertight and secure.
Soft metals sit at the edges of your home where wind, water, and ice hit hardest. Over time, eavestrough corners start to drip, downspouts pull away from the wall, soffit panels work loose, and fascia capping gets bent or dented. These issues might look minor from the ground, but they can let water into your walls and eaves, invite pests into the attic, and lead to much bigger repairs if they're ignored.
Severe Chinook wind gusts in Southern Alberta can pull loose soffit panels out of eave channels or detach fascia capping. Our mobile soft metal repair technicians re-anchor metal trim with high-wind fasteners and replace hail-dented sections.
Most eavestrough leaks happen at the corners, end caps, and downspout outlets, where sections are joined together. Over years of freeze-thaw cycles, the original sealant hardens, cracks, and lets water through. Simply adding more caulk on top rarely holds. We clean out the old sealant, dry the joint, and reseal it properly so the repair lasts. We also check for sagging runs, loose hangers, and poor slope that can leave water sitting in the trough, and adjust them so water flows to the downspouts as it should.
When eavestroughs sag or pull away from the house, the cause is often loose or failed hangers, or rotted wood behind the fascia. Heavy snow and ice loads in Calgary make the problem worse. We re-secure gutters with heavy-duty hangers into solid framing, and if the wood behind the fascia is soft, we'll let you know so it can be repaired before the gutter is rehung.
Hail often leaves dents in eavestroughs, downspouts, fascia, and vent caps. These dents can be a useful sign of how severe a storm was and are commonly included in hail insurance claims. Badly dented sections can also affect how water flows. We replace damaged pieces with colour-matched aluminum and provide photo documentation if you're filing a claim.
Our service trucks carry portable aluminum metal brakes and a wide stock of factory colors to perform custom on-site metal repairs on the spot.
A little maintenance goes a long way. We recommend checking your soft metals in spring, after the snow melts, and again in fall before winter arrives. A typical visit can include:
Pricing depends on the type and amount of repair needed, the number of locations around the home, whether replacement material needs to be colour-matched or custom-bent, the condition of the wood behind the fascia, and the height and access around your home. We'll take a look and give you a written quote before starting.
Can you fix just one leaking corner? Yes. Small repairs like resealing a single corner or re-anchoring one downspout are common service calls.
Should I repair or replace my eavestroughs? If the gutters are generally in good shape with a few leaks or loose sections, repair makes sense. If they're sagging along long runs, leaking at many joints, or badly dented, replacing them with seamless eavestroughs is often the better long-term value.
Can you match my existing colours? We carry a wide range of factory colours and can match most common soffit, fascia, and eavestrough shades.
Contact Raico Roofing for a free quote.