Seamless 5" and 6" aluminum eavestroughs in Calgary: custom roll-formed on site, heavy internal screw hangers, and optional leaf guards.
Seamless 5" and 6" aluminum eavestrough installation in Calgary. Custom roll-formed on site to fit your home's exact dimensions, complete with heavy-duty internal screw hangers, oversized downspouts, and optional leaf guard covers.
Your eavestroughs have one job: catch the water coming off your roof and move it safely away from your home. When they're undersized, poorly sloped, or leaking at the joints, that water ends up where it shouldn't, soaking fascia boards, staining siding, washing out landscaping, and pooling against your foundation. In Calgary, where a single Chinook can melt a roof's worth of snow in an afternoon, a properly built gutter system is one of the most important protections your home has.
Standard section-assembled gutters leak at every joint after Alberta's severe winter freeze-thaw cycles. Raico Roofing custom roll-forms continuous seamless aluminum eavestroughs directly on site, eliminating leak points along eave runs.
Our portable roll-forming machine turns flat aluminum coil into finished eavestrough right in your driveway. Each run is cut to the exact length of the roofline it serves, so a long eave gets one continuous piece instead of several short sections joined together. The only seams left are at the corners and end caps, where they're sealed and reinforced.
Aluminum has become the standard for residential eavestroughs across Alberta, and it earns that spot. It doesn't rust, so standing water, melting snow, and wet leaves won't eat through it the way they eventually do with galvanized steel. It's light enough to hang in long continuous runs without overloading your fascia, yet strong enough in heavier gauges to hold up to snow, ice, and the occasional ladder.
Aluminum also forms cleanly and precisely, which is what makes seamless on-site fabrication possible in the first place. Compared to vinyl gutters, which can become brittle and crack in deep cold or sag in summer heat, aluminum gutters stay stable through Calgary's wide temperature swings. And because the colour is baked onto the metal at the factory, it holds its finish for years instead of needing to be repainted.
Most Calgary homes are well served by standard 5" eavestroughs. Larger roofs, steep pitches, long uninterrupted eaves, and areas where two roof slopes drain into one valley can send more water into the gutter than a 5" trough can handle during a heavy storm or a fast melt. In those cases we recommend 6" eavestroughs paired with oversized downspouts. We'll look at your roof during the estimate and size the system to what it actually needs to carry.
A gutter is only as good as its installation. Every run we install is pitched toward its downspouts so water drains instead of sitting in the trough and freezing overnight. Internal screw hangers are fastened into the rafter tails, not just the fascia face, so the system stays tight under the weight of snow and ice. Downspouts are placed and extended to discharge water well away from your foundation, walkways, and window wells.
Choose from over 30 durable factory-baked enamel finishes that perfectly match your home's soffit, fascia, siding, or roof trim.
Seamless aluminum gutters typically range from $6 to $8 per linear foot. Where your project lands in that range depends on the height of your home, access around the property (fences, decks, landscaping, tight side yards), the number of corners and rooflines, and whether old gutters need to be removed first. Downspouts, leaf guards, and any soffit or fascia work are quoted separately. Book a free on-site estimate and we'll measure everything and give you a clear written quote.
Contact Raico Roofing for a free quote.